- Other Car Care Products[2]
- Laboratory Bottle[1]
- Polymer[5]
- Industrial Computer & Accessories[1]
- Touch Screen Monitors[10]
- Other Computer Parts[2]
- Other Computer Products[2]
- Decorative Films[1]
- Sun Sheets & PC Embossed Sheets[2]
- Screen Protectors[1]
- Televisions[1]
- Other Consumer Electronics[2]
- Solar Cells[4]
- EL Products[10]
- Insulation Materials & Elements[8]
- Electronic Data Systems[2]
- Electronic Signs[2]
- Other Electronic Components[10]
- Other Solar Energy Related Products[4]
- Solar Energy Systems[1]
- Other Lighting Accessories[10]
- Emergency Lights[1]
- LED Backlights[1]
- Other LED Lighting[1]
- Other Lights & Lighting Products[2]
- Welding Rods[1]
- Energy Meters[1]
- Metal Slabs[2]
- Whiteboard[1]
- Other Presentation Equipment[3]
- Adhesive Tape[3]
- Plastic Film[10]
- Plastic Processing Service[2]
- Agricultural Plastic Products[3]
- Electronic Plastic[1]
- Other Plastic Products[10]
- Plastic Rods[4]
- Plastic Sheets[10]
- Plastic Tubes[10]
- EVA[5]
- PET[7]
- Other Security & Protection Products[2]
- Reflective Material[8]
- Other Safety Products[1]
- Advertising Players[2]
- Other Advertising Equipment[3]
- Mobile Phone LCDs[1]
Epoxy pre-impregnated DMD Class F Insulation Film
reliable Thermal bonding material,high mechanical and electrical property,good flxibility.very high peeling strength.
Description:
Epoxy Pre-impregnated DMD class F is a kind of reliable Thermal bonding material, with the heat-resistanting class of F(155°C),Compounded with medial polyester film and Polyester fibre non-woven fabric on both sides. impregnation with class F heat-resistant Resin, baking into semi-solid layered material., solidification was made by customer when use it.
Product Feature:
a),High mechanical property, excellent electrical property.,suitable for high intensitive insulation system.
b),Good flexibility,strong bounding force between resin and DMD matrix,without powder dropping and decolorization.
c),Long storage duration,and handy forming technique.
d),High content of soluble resin,product and metal conductor are all in one after solidification, with very high peeling strength
e),Low content of volatile substance , insured low partial discharge of the product.
Application:
Suitable for interlayer and sealed end insulation in Dry-type transformer of class F, interturn insulation in Motor, laminated rolled tubes and so on.
Curing conditions:
Temperature (°C) | 130 | 140 | 150 |
Time (hour) | 5 | 4 | 3 |
Technical index:
No | Names of index | Unit | Index value | ||||||||||
1 | Conventional thickness | Mm | 0.15 | 0.18 | 0.20 | 0.23 | 0.25 | 0.30 | 0.35 | 0.40 | 0.45 | ||
2 | Thickness tolerance | Mm | ±0.020 | ±0.025 | ±0.030 | ±0.030 | ±0.030 | ±0.030 | ±0.035 | ±0.040 | ±0.045 | ||
3 | quantification | G/m2 | 170 | 210 | 230 | 240 | 260 | 300 | 360 | 440 | 490 | ||
±25 | ±30 | ±35 | ±30 | ±40 | ±45 | ±50 | ±55 | ±60 | |||||
4 | Film thickness | mm | 0.05 | 0.05 | 0.05 | 0.10 | 0.10 | 0.15 | 0.188 | 0.25 | 0.25 | ||
5 | DMD matrix thickness | Mm | 0.10 | 0.14 | 0.15 | 0.18 | 0.20 | 0.25 | 0.30 | 0.35 | 0.40 | ||
6 | Tensile strength, longitudinal | n/cm | ≥70 | ≥80 | ≥100 | ||||||||
7 | Resin content | % | 35±5 | 30±5 | 25±5 | 20±5 | |||||||
8 | volatile substance content | % | ≤1.5 | ||||||||||
9 | soluble resin content | % | ≥85 | ||||||||||
10 | Dielectric strength | MV/m | ≥40 | ||||||||||
11 | Breakdown Voltage | KV | 7 | 7 | 7 | 10 | 10 | 13 | 15 | 18 | 18 | ||
12 | Tensile and shear strength | Mpa | ≥3.0 | ||||||||||
13 | Heat shrinkage rate | Transverse | % | ≤1.0 | Other specification is available based on negociation with customer | ||||||||
Longitudinal | ≤2.0 | ||||||||||||
14 | Thermal rating class(TI) | °C | ≥155 |